Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Spring Hill?
Spring replacement in Spring Hill typically costs $180–$340 for one torsion spring, including the spring and the labor to install it. Because springs are almost always replaced as a matched pair, most homeowners here pay closer to $360–$680 for the set. The written estimate you get before any work starts sets the final price, and that estimate is free.
Those numbers cover a standard two-car garage door with a torsion setup, which is what you’ll find on most homes across Spring Hill. Heavier doors, high-lift tracks, and extension spring conversions push toward the top of the range and beyond. If the door won’t lift, won’t stay up, or has a visible gap in the coil, the spring is the first thing we check, and we can usually tell you the number before we touch anything.
Key Takeaways
- One spring: $180–$340. A matched pair: roughly $360–$680.
- Springs are a wear item, not a defect. In Florida’s humidity and heat they simply don’t last as long as they do up north.
- Never let anyone but a trained technician work on a torsion spring. This is the most dangerous part of the whole door.
- Estimates are free and the written estimate is the price. Call (844) 560-6506. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Spring Replacement Cost Breakdown (2026)
Here’s how the line items shake out for a typical spring job in Spring Hill. All figures are typical estimated ranges for the local market. The final number comes from the written estimate, which depends on your door’s size, weight, and how the springs are mounted.
| Item | Typical Estimated Range |
|---|---|
| Torsion spring replacement – one spring | $180–$340 |
| Torsion spring replacement – matched pair | $360–$680 |
| Heavy or oversized door spring (upcharge over standard) | Quoted after inspection |
| Cable repair (often needed with a broken spring) | $130–$250 |
| Track realignment (door pulls off track when a spring fails) | $120–$240 |
| Roller replacement (if rollers are worn or cracked) | $110–$220 |
| Full garage door repair (spring plus related hardware) | $150–$600 |
A spring rarely fails alone. When a torsion spring snaps, the door drops hard, and that impact is what bends a track, pops a cable, or cracks a roller. So the realistic question isn’t “what does a spring cost” but “what does it cost to get the whole system working again.” That’s why we quote the spring on its own and the related repairs separately. You see exactly what you’re paying for, and you decide what to do now versus what can wait.
If the opener is the part acting up rather than the spring, that’s a different job. Our Carrington Garage Door Repair team handles opener repair and opener installation as separate services, with their own pricing. Opener repair runs $120–$320, and a full opener installation runs $250–$550. If a new door is in your future, new door installation in Spring Hill runs $700–$2,200 depending on size, material, and insulation.
What Affects Spring Replacement Pricing in Spring Hill
- One spring or a pair. Springs wear together, so replacing one and leaving the other means the old one fails soon after. A matched pair costs about twice the single-spring range, but it’s almost always the smarter buy. We’ll explain the tradeoff and let you choose.
- Door size and weight. A single-car door takes lighter springs than a double-car door. A heavy insulated door, or one with a glass panel, needs a heavier spring rated for that load. Heavier spring, higher price.
- Spring type. Most Spring Hill homes use torsion springs, mounted on a shaft above the door. A smaller number use extension springs, which run along the sides. Extension springs are usually cheaper to replace but come with their own safety-cable requirements, and we factor that into the quote.
- How the springs are mounted. A standard center-mounted torsion setup is quick to work on. A high-lift setup, a rear-mount, or a door with limited headroom takes more time and more care, and the estimate reflects that.
- Florida heat and humidity. Springs here are exposed to year-round warmth and damp air, and metal under constant tension in those conditions fatigues faster than it would in a cooler climate. That shortens the service life of a spring, which is one reason we lean toward a matched pair: you’re replacing a wear item, not fixing a fluke.
- What else the failure took out. A snapped spring can bend a track, snap a cable, or crack a roller. Each of those is priced separately so you’re not paying for a bundled “spring repair” that quietly includes work you didn’t need.
What Can Go Wrong If You Wait
A broken spring isn’t a “get to it later” problem. The door is now supported by an opener designed to assist a functioning spring, not to lift the full weight of the door. Running that opener against a dead spring burns out the gear and the motor over time, and a burned-out opener is a much bigger bill than a spring. It’s also how doors come off track, which is where the cable and track damage in the table above comes from.
More importantly, a door with a broken spring can drop without warning. If a spring has snapped, stop using the door, and don’t try to open it by hand. High-tension springs and their cables store an enormous amount of energy, and the tools and technique required to release that safely aren’t a DIY project. This is the one part of garage door work we tell every homeowner to leave to a trained technician. We’ve seen what happens when a spring lets go mid-repair, and it’s not worth the risk for any homeowner.
If you’re near Spring Hill, give us a call and we’ll get a technician out to take a look. We diagnose the actual problem before recommending any work, and we repair what can be repaired rather than pushing a replacement.
How Does Spring Replacement Work?
The job starts with a measurement. We weigh the door, check the drum size and the track radius, and confirm the correct spring rating for your specific door. A spring wound for the wrong weight is a spring that fails early, so this step matters. Then we release the tension safely, remove the old spring, and install the new one. The door gets a full balance test and a travel check before we call it done.
Most spring replacements are done in a single visit. The door is back to normal the same day in the large majority of cases. If the failure also damaged a cable or a track, we’ll tell you during the estimate so there are no surprises mid-job.
We work on the equipment you already own. Whether your door is a LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor setup, we recognize it and we’ve worked on it before. No brand lock-in. No “we only service what we sell.” One call covers the spring, the door, and the opener together, which matters when you’re trying to get back up and running without juggling three different trades.
How to Save on Spring Replacement
- Replace the pair, not the single spring. It costs more up front but saves you a second service call when the other spring fails, which it usually does within a year or two. The pair is the cheaper long-term move.
- Combine the spring with other work that’s due. If your rollers are shot or a cable is frayed, having it done during the same visit is cheaper than booking a second trip. We’ll flag anything that’s close to failing during the estimate.
- Get the estimate in writing before work begins. Our estimates are free, and the written estimate is the price. No surprises on the invoice.
- Don’t wait for a full failure. A spring that’s visibly stretched, has a gap in the coil, or is making a bang when the door opens is on its way out. Catching it early avoids the track and cable damage that follows a full break.
- Ask about the door’s balance. A door that’s out of balance puts extra strain on the spring and shortens its life. If we find an imbalance during the visit, correcting it protects the new spring you just paid for.
Estimates are free. Call (844) 560-6506. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Spring Hill?
Expect $180–$340 for one spring and roughly $360–$680 for a matched pair, installed. Standard two-car doors with a torsion setup land near the middle of that range. Heavier doors or high-lift tracks push toward the top. The written estimate sets the final price, and it’s free. Call (844) 560-6506 for an exact quote.
Is it cheaper to repair or replace the spring?
Repair is the only option for a broken spring. Springs can’t be welded, bent, or re-tensioned once they’ve failed, so replacement is the fix. The real cost decision is one spring versus a matched pair. A pair costs about twice the single-spring range but avoids a second service call when the other spring fails. For most Spring Hill homeowners, the pair is the cheaper path over the life of the door.
Can you replace a garage door spring the same day?
Yes, in most cases. Spring replacement is usually a single-visit job, and we can often get a technician out the same day. If the spring failure also damaged a cable or track, the job may take a little longer, but we’ll tell you before we start. Call (844) 560-6506. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why did my spring break so fast?
Heat and humidity are the main culprits in Spring Hill. Springs here are under constant tension in year-round warm, damp air, and that shortens their service life compared to cooler climates. A spring rated for the wrong door weight will also fail early, which is why we measure before we replace. If your spring broke much sooner than expected, there may be another issue, and we’ll check for it during the visit.
Can I replace a garage door spring myself?
No. Torsion springs and their cables store an enormous amount of energy, and releasing that tension incorrectly can cause serious injury. The tools, the winding technique, and the safety steps are not a DIY job, and a spring that’s wound to the wrong tension is dangerous to operate. Leave this one to a trained technician. Call (844) 560-6506 and we’ll handle it safely.
What else should I check when the spring is replaced?
Cables, rollers, the track, and the door’s balance. A snapped spring often damages one or more of those, and worn rollers or a frayed cable will shorten the life of the new spring. We check all of it during the estimate. Roller replacement runs $110–$220, cable repair runs $130–$250, and track realignment runs $120–$240. Full garage door repair, when several of these are needed together, runs $150–$600.
Get a Free Spring Replacement Estimate
A broken spring is one of those problems that’s cheaper to fix than to ignore, and the numbers in Spring Hill are straightforward. One spring runs $180–$340. A matched pair runs roughly $360–$680. Our technicians have up to 13 years of experience with torsion and extension springs, and we work on the door and opener you already have. We diagnose the actual problem, we repair what can be repaired, and the written estimate is the price.
Call (844) 560-6506 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re your local garage door specialist for Spring Hill, and we’ve seen your setup before.
Written by the team at Carrington Garage Door Repair.
Pricing reflects the Spring Hill market as of 2026. Carrington Garage Door Repair offers free estimates – call (844) 560-6506.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Nia Hampton"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty and had it fixed that morning. Door's quieter now than it was before it broke."
- Shannon Hoffman"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Craig Hayes